WRX High-Volume Wash Water Recovery Systems
Automatic Vehicle Washes typically demand a large volume of wash quality water be cleaned to a nominal 10 micron depending on the wash pump requirements which the water must be recycled through. Pan Pacific Environmental and Western Water Products manufactures a series of economical wash water recovery system designed to meet these needs utilizing a standard WRC Series Wash Water recovery System and adding a Post Filtration Pack. This combination is available as a WRX System.
Pan Pacific also offers a number of options designed to provide pits, trenches and drains, control odor and control sediment buildup in the pits.
Basic WRX includes WRC + Optional Post Filtration Pak + Optional Mud Hopper
The table below shows models up through 120 GPM. For larger sizes are available (consult Pan Pacific):
| Series | Maximum GPM Rating | Cyclone Particulate Rating | Post Filtration Particulate Rating | Application |
| WRX-40 | 40 | 40 Micron | 10 Micron | Vehicle washes requiring 10-20 micron wash water. For use with high pressure pumps in self serve car wash. Pumps directly to Wash |
| WRX-80 | 80 | 40 Micron | 10 Micron | |
| WRX-120 | 120 | 40 Micron | 10 Micron |
The WRX is provided with a nominal 40 Micron Cyclone Separator and modified to include a cleanable Post-Filtration Cartridge Filter Pack. In operation, only one Cartridge Filter is utilized at a time, and when that filter becomes dirty or “fouled” a manual valve can be rotated 180 degrees to switch flow through a standby clean cartridge filter.
Once pressure and flow is removed from the dirty filter, it can be removed for cleaning and replaced for continued reuse. Utilizing a nominal 40 Micron Cyclone resists pressure drop through the Cyclone and can generally be pumped directly back into the wash without going into an intermediate holding tank and being re-pressurized.