In a time where environmental issues are a growing concern, alternative methods for collecting and handling wash water are being sought in the power washing industry.  For the purpose of collecting wash water for reuse or for simply picking up for discharge, we offer Vinyl Collection Mats complete with encircling Drive-Over Foam Berms.  These Mats are used to:

• Provide a temporary wash area which is portable
• Create a wash pad which is sealed from the surface on which it it located
• Prevent unwanted water run-off from the wash site
• Capture wash water at one or more low spots forcing the water to pool for collection and reuse

Standard Wash Mats and Underlays are available in standard materials and sizes and have been pre-engineered for the following applications:

Application	Material	Size
Clean-Out Mats	1802 or 2202	10′ x 10′
Box Trucks, or vehicles and equipment of similar size	1802 or 2202	14′ x 22′
Buses of vehicles and equipment of similar size	1802 or 2202	14′ x 30′
Tractor Trailers or vehicles and equipment of similar size	1802 or 2202	14′ x 75′
Multi-Purpose	1802 or 2202	20′ x 50′
Underlay Mats (If required)	2202	As Required to Fit Above
All Mats are provided with Installed Foam Berms; Under-lays are not.

Water Diversion Systems are custom designed collection mats configured to fit odd-shaped areas and are best suited where there is access to a sloped surface.  Wash water is then diverted or channeled to a single low spot for collection rather than having to move the pump or collection device from spot to spot to collect the water.  This design may be applied to Standard Wash Mats as well.  Refer inquiries to Western Water Products for evaluation and pricing.
Support Products:
Repair Kits Flat Mats (All Sizes – No Berms) Portable Water Filled Dikes Portable Water Filled Berms	Collapsible Water tanks Replacement Parts Protective Underlay (Deters puncture of Vinyl Mat on rough surfaces)

 

Vinyl TXN Material Specifications:
	TXN18	TXN22
Base Fabric and Weight	Woven Polyester 5.30 OZ/Sq yard	Woven Polyester 6.00 OZ/Sq yard
Coated Fabric Weight +/- 1 OZ	18.0 OZ/Sq yard – PVC	22.0 OZ/Sq yard – PVC
Coating Distribution	60 / 40	60 / 40
Sealing Properties	Dielectric X	Dielectric X
Vinyl Mat and Under-lay Mechanical Properties:
	TXN18	TXN22
Tensile Strength Grab Warp	450 lbs	500 lbs
Tensile Strength Fill	400 lbs	450 lbs
Tensile Strength 1” Strip Wrap	320 lbs/in	400 lbs/in
Adhesion R.F.	12.5 lbs/in	12.5 lbs/in
Adhesion Thermal	12.5 lbs/in	12.5 lbs/in/td>
Tear Strength, Tongue Warp	80 lbs	110 lbs
Tear Strength, Tongue Fill	100 lbs	110 lbs
Abrasion Resistance (Taber) TO exposed Fabric (Face)	Wheel H18 Cycles 250	Wheel H18 Cycles 300
Puncture – Screwdriver	70 lbs	100 lbs
Puncture – Ball	400 lbs	560 lbs
Hypo Resistance	600 psi	600 psi
Flame Resistance Time after Flame	Sec Max	Sec Max
Flame Resistance Length of Char	In. Max	In. Max
Support Products: Repair Kits Flat Mats (All Sizes – No Berms) Portable Water Filled Dikes Collapsible Water tanks Replacement Parts Protective Underlay (Deters puncture of Vinyl Mat on rough surfaces) Vinyl Wash Walls (protects areas away from wash pad from dirty splash)