The Big Sucker Wash Water recovery and filtration system is designed for use with High Pressure washers and hose washes. It is designed to operate at a maximum of 25 GPM and can handle the requirements of several pressure washers at one time provided the maximum continuous filtration rate of 25 GPM is not exceeded. The system can be used in higher volume fire hose wash applications with the addition of an expansion tank and a fire hose re-pressurization pumping system.The system operates on 1/60/115 VAC, 30 amp power, and provides wash water quality water which is typically filtered to a particulate size of 10 micron or better and reduces oil to around 15-25 ppm when properly maintained.
The system combines a series of CELLOFOAM strainers, cartridge filters, 10 micron cyclonic separation, continuous Ozonation/Aeration and continuous water recirculation to accomplish desired wash water quality results.
Model BSR-025 BIG SUCKER HEAVY-DUTY
WASH WATER RECOVERY SYSTEM
| BIG SUCKER Featured Highlights | |
| System Housing Material | Rugged Corrosion Resistant Poly |
| Pumps | Electric Operated |
| Ozonation/Aeration System – Standard | 115 VAC, 1 Ph, 60 Hz / Air Injection |
| Pick-Up Devices | Corrosion Resistant. Type of Pick-Up Device varies with application (See Accessories Page) |
| Continuous GPM Rating | Maximum 25 GPM |
| Output Pressure | Maximum 40 psi |
| Oil Coalescing | Yes |
| Oil Adsorption | Yes |
| Heavy Duty Strainer | Standard |
| Heavy Duty Filters | Standard |
| Multi-Functional Operation |
|
| Oil Busting Filters | Optional MYCELX technologies are available |
| Pre-Filtration |
|
| Fresh Water make-Up | Standard |
| Pit Options | Available |
The BIG SUCKER is shown above with:
- An Above Ground Mud Hopper which can also be part of a Pit Sludge Removal System
- An Oil Collection Barrel which is part of a MINI-SUCKER Pit Oil Skimming System and an Oil-Water Separator System
For details contact Pan Pacific Environmental Group or email us from our Literature Request Page