Environmental Solutions              A Western Water Products Company Distributor

Land Fill

For details contact Pan Pacific Environmental Group or email us from our Literature Request Page

Home Up Literature Request SearchXL Systems 

XL Series High-Volume Wash Water Recovery Systems for Automatic Vehicle Washes

Automatic Vehicle Washes typically demand a large volume of wash quality water be cleaned to a nominal 10 micron depending on the wash pump requirements which the water must be recycled through.  Western Water Products manufactures a series of economical wash water recovery system designed to meet these needs utilizing a higher grade 10 micron Cyclone Separator but unlike the WRX System it does not use a Dual Filtration Pack.  

Western Water Products also offers a number of options designed to provide pits, trenches and drains, control odor and control sediment buildup in the pits. 

The table below shows models up through 120 GPM.  For larger sizes are available (consult WWP).



Standard XL System does not include Cartridge Filtration Pak shown above or Optional Mud Hopper


Maximum GPM Rating

Cyclone Particulate Rating

Post Filtration Particulate Rating




Nominal 10 Micron

Use WXL Series

Vehicle washes requiring nominal 10-20 micron wash water.  For use with centrifugal pumps. Pumps directly to wash on demand.



Nominal 10 Micron

Use WXL Series



Nominal 10 Micron

Use WXL Series

The WRX Series is available standard with a bank of nominal 10 Micron Cyclone Separator to minimize impact on the “down-stream” Cartridge Filters.  A positive particulate size of 10-20 Micron filtration is accomplished through the use of Post Filtration Cartridge Filters rated at up to 120 GPM.  Only one filter is utilized at a time, and when that filter becomes dirty or “fouled” a manual Jandy Valve can be rotated 180 degrees to switch flow through the standby clean cartridge filter.  Once pressure and flow is removed from the dirty filter, it can be removed for cleaning and reuse. 

It should be noted, because nominal 10 Micron Cyclones experience a large pressure drop to accomplish the primary filtration task, cleaned wash water must be deposited into a wash water holding tank and must be re-pressurized back to the wash on demand.

Standard Features and Options

Features and Options


Nominal Cyclone Filtration

10 Micron

Post Filtration to 10-20 Micron

Use WXL Series

Constant Water Recirculation


Constant Ozonation/Aeration


Re-circulation Back to Pits


Constant Cyclone Discharge


Suction Pump Provided


Re-pressurization Pump

Optional RPS

Holding Tank

Optional WST

Mud Hopper

Optional MH-05

Pit Oil Skimming


Pit Sludge Removal

Optional SRS System

Hopper Bottom Pit

Optional HBP-KIT

Pit and Trench Grating


Tank & Pit Odor Control


Options: See Accessories Page

Information Request Form

Select the items that apply, and then let us know how to contact you.

Send product literature
Send company literature
Have a salesperson contact me



For details contact Pan Pacific Environmental Group or email us from our Literature Request Page

Copyright © 2009 Pan Pacific Environmental
Last modified: 02/10/09